Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Paradise Homeowners
Refinishing is the repair for a wood floor that has gone dull, scratched, or gray in the traffic lanes but still has solid wood underneath. In Paradise, where sun through west-facing windows fades a finish faster than most people expect and desert air keeps indoor humidity low, that wear shows up sooner than it does in wetter climates. Our technicians have up to 14 years of experience with sanding, staining, and screening wood floors, and we can tell you at the estimate whether the wood is thick enough to take another cut. We’re licensed and insured, estimates are free, and you get a written quote before any work starts. Sanding throws a lot of dust and is not a job to take on yourself. Call (888) 343-1639 to book your free estimate.
What Our Hardwood Floor Refinishing Service Includes
Refinishing covers a few different jobs, and which one you need depends on the condition of the finish and the wood beneath it. We assess that at the estimate, not over the phone.
Hardwood Floor Sanding
Sanding takes off the old finish and a thin layer of the wood surface to expose clean, even grain. You need it when the finish is worn through in spots, when there are deep scratches or dents, or when an old stain has gone patchy. We use drum and orbital sanders matched to the wood species and finish type, working through grits in sequence so the floor comes out flat and even, and we check the wood thickness first because not every floor has enough left to sand again.

Hardwood Floor Staining
Staining changes the color of the wood, either back to its original tone or to something new. It makes sense when you’re updating a room’s look, when the old stain has faded unevenly, or when a repair left a patch of bare wood that needs to blend in. We apply stain after sanding, test the color on a small area so you can see it on your own floor, and seal it with a finish coat. How closely a stain matches an existing sample depends on the species and the condition of the wood, so we check that at the estimate visit rather than promise a match sight unseen.

Hardwood Floor Restoration
Restoration is for floors with real damage: water stains, pet marks, deep gouges, or boards that have cupped or lifted. It’s the right call when you’d rather keep the original wood than replace it, which is often the case in older Paradise homes where the flooring is worth saving. We repair or replace individual boards where needed, then sand, stain, and finish the whole area so the repair disappears. Whether a floor can be restored rather than replaced depends on the thickness of the wood and its condition, and we’ll tell you honestly at the estimate which way makes sense.

Hardwood Floor Buffing
Buffing is a light maintenance step that smooths out minor surface scuffs and refreshes the sheen without removing wood. You need it when the floor looks tired but the finish is still intact and there’s no bare wood showing. We screen or buff the surface, clean it thoroughly, and apply a fresh coat of finish. It’s a smaller job than a full sand and a good way to stretch the time between full refinishes.
Screen and Recoat Hardwood Floors
A screen and recoat is the middle option: we lightly abrade the top coat, clean the floor, and apply a new finish layer. It’s the right service when the finish is dull or lightly scratched but hasn’t worn through to the wood. We check for wax, oil, or a previous finish that won’t accept a new coat before recommending it, because a recoat over the wrong finish will peel. When it’s a good fit, it’s faster and less disruptive than a full sand.
Stair Refinishing
Stairs take more abuse than any other wood surface in the house, and they’re usually the hardest part to sand by hand. We refinish treads, risers, and railings to match the floor below, working around the tight corners and edges a machine can’t reach. It’s worth doing when the stairs creak, look scuffed, or no longer match a newly finished floor. We check the condition of each tread at the estimate and tell you if any need repair before finishing.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Work With for Hardwood Floor Refinishing
Finishes, sealers, and stains come from a handful of major manufacturers, and each one behaves a little differently under the sander and the applicator. We work with Armstrong and Shaw finish systems regularly, and we know how each one builds up, how long it needs between coats, and how it holds up to the dry indoor air common in Paradise. We also work alongside Daltile and Karndean on whole-home projects where the wood floors are being refinished at the same time as tile or vinyl goes in elsewhere in the house.
Knowing the product matters more than the label on the can. A finish that cures hard in a humid climate can behave differently in a dry one, and the application method has to match the product, the wood species, and the room. Whether you have an existing finish from Armstrong, Shaw, or any other maker, we can help you plan the right refinishing approach.
Signs You Need Hardwood Floor Refinishing Right Now
- Gray or dull traffic lanes. The finish has worn thin in the paths people walk most, and the wood is starting to dry out and gray over. Once the finish is gone, the wood absorbs moisture unevenly and the wear spreads faster.
- Deep scratches you can feel with a fingernail. Surface scuffs are cosmetic, but scratches that catch a fingernail have gone through the finish into the wood. Those need sanding rather than a simple recoat, or they’ll show through the new finish.
- Water rings and dark stains. A white ring usually means moisture sat on the finish; a dark stain means it got into the wood. Both are worth addressing before the wood underneath starts to cup or lift.
- Cupped or lifting boards. Edges that curl up mean moisture is getting in from below or from spills. Sanding alone won’t fix the cause, so it’s worth having the floor looked at before refinishing.
- Finish peeling or flaking in patches. That usually means a previous coat was applied over the wrong surface or the wrong product. A proper sand and refinish resets the whole floor to a stable base.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and assessment. We walk the floor with you, check the wood thickness, look for moisture problems and repairs, and talk through what you want the finished floor to look like. That’s where the written price comes from, and it’s free.
- 2
Scheduling and prep. We set an install day that works for you and explain what to move out of the rooms beforehand. Furniture, rugs, and anything fragile come out before we start, and we seal off the work area to keep dust contained.
- 3
Sanding and repair. We sand through the grits in sequence, replace any damaged boards, and fill gaps where it makes sense for the species. We check the floor’s flatness as we go so the finished surface reads even underfoot and in raking light.
- 4
Staining and sealing. If you’re changing the color, we test the stain on your floor first so you can approve it. Then we apply the finish coats, letting each one cure properly before the next, since rushed coats are the most common reason a finish fails early.
- 5
Final walkthrough. We walk the finished floor with you, point out anything to watch for, and explain how to care for it in Paradise’s dry air. The schedule for the next job is set at the estimate, and you’ll know the plan before we start.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Paradise?
Hardwood floor refinishing in Paradise typically runs $1,800 to $5,000 for a 500 to 800 square foot project, materials and labor included. That range covers a straightforward sand, stain, and finish; a screen and recoat is usually at the lower end, while restoration work with board replacement or stair refinishing pushes toward the top. As a starting point, refinishing runs from about $3 per square foot, though the actual figure depends on the wood, the room, and the condition of the subfloor and existing finish. The written estimate sets the final price.
What moves the number: the square footage, how much repair the floor needs, whether you’re changing the stain color, how many coats the finish requires, and whether stairs are part of the job. The best way to avoid overpaying is to get the scope in writing before work starts, so you know what’s included and what isn’t. A free estimate from us includes the in-home measure, the condition assessment, and a written quote.
| Service | Typical estimated range |
|---|---|
| Hardwood floor refinishing (500-800 sq ft) | $1,800-$5,000 |
| Per square foot starting point | from about $3 |
| Full hardwood floor installation (for comparison) | $4,500-$12,000 |
| Floor repair | $250-$1,500 per job |
Hardwood Floor Refinishing Near Paradise – Our Service Area
We work with homeowners across Paradise and the surrounding valley, including Whitney, Sunrise Manor, North Las Vegas, Winchester, Spring Valley, Enterprise, Henderson, Summerlin, Las Vegas, Boulder City, and Sandy Valley. Scheduling is set at the estimate, so you’ll know when the work happens before we start. Our flooring installation Paradise service covers the full range of carpet, tile, and wood, and if you’re nearby you can also read about Paradise, Whitney, and Sunrise Manor.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Paradise
Hardwood floor refinishing is sanding off the old finish and a thin layer of the wood surface, then applying a new stain and finish. It restores the look of a worn floor without replacing it, and it’s usually the cheaper option when the wood is still thick enough to take another sand. We check the wood thickness at the estimate to confirm refinishing is the right call. Call (888) 343-1639 to schedule your free estimate.
Most refinishing jobs run several days from start to finish, because each finish coat needs time to cure before the next one goes on. The exact schedule depends on the square footage, how much repair is needed, and the finish product you choose. We set the schedule at the estimate, so you’ll know what to expect before the work starts. Call (888) 343-1639 for an exact quote on your floor.
Hardwood floor refinishing in Paradise typically costs $1,800 to $5,000 for a 500 to 800 square foot project, with refinishing starting from about $3 per square foot. The final figure depends on the wood, the room, repairs needed, and whether stairs are included. The written estimate sets the final price, and estimates are free. Call (888) 343-1639 for an exact quote.
Yes, we work with Armstrong and Shaw finish systems regularly, along with the other major finish and stain lines. We match the application method to the product and the wood species, since each finish behaves a little differently in Paradise’s dry air. We’re not a dealer for any brand, but we know how these products wear and how to apply them correctly. Call (888) 343-1639 to talk through your floor.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Refinishing is a scheduled job that starts with a free in-home measure and estimate, then a written price, then a booked install day. Call (888) 343-1639 to get your estimate on the schedule.
We’re licensed and insured, and the written estimate spells out exactly what the job covers. Finish durability depends on the product, the wood, and how the floor is cared for afterward, so we explain the care routine at the walkthrough. If something isn’t right, we want to hear about it and we’ll work with you on it. Call (888) 343-1639 to review the scope and get a written estimate.
Clear the rooms of furniture, rugs, and fragile items before we arrive, and plan to stay off the floor while the finish cures. Sanding generates dust even with containment, so sealing off adjacent rooms helps. We’ll walk you through the timing at the estimate, including when you can put furniture back and when you can walk on it. Call (888) 343-1639 to schedule your free in-home estimate.
Schedule Your Hardwood Floor Refinishing Service in Paradise Today
If your wood floors have gone dull, scratched, or gray, refinishing can bring them back without the cost of replacement. Call (888) 343-1639 to schedule a free, no-obligation estimate anywhere in Paradise. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written quote before any work starts, and the written estimate sets the final price.
Written by the team at Flooring Installation Paradise.